Filter
Top Products
157
LSQT1011
Troubleshooting
Others
With a computer (Macintosh)
Problem Check points
Cannot write to DVD-
RAM.
Cannot format a disc with
the DVD-RAM Driver.
≥ (Windows XP only) Deleting the unit name from the Device
Manager and then connecting the unit and the computer
again can improve this. Follow the steps below. Before
proceeding, be sure to remove the disc from the unit.
1) Select [start] # ([Settings] #) [Control Panel] #
([Performance and Maintenance] #) [System].
2) Click the [Hardware] tab, then click [Device Manager].
3) Right click [MATSHITA DVD-RAM LMXK1931 USB Device]
displayed at [DVD/CD-ROM drives] and then select
[Uninstall].
4) When erasing is complete, reboot the computer. The
computer will automatically recognize the unit again.
When the USB cable is
disconnected, an error
message will appear on
the computer.
≥ To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions on the
screen.
Problem Check points
Even if connected by the
USB cable, this unit is not
recognized by the
computer.
≥ Have you set this unit to the correct mode?
# The unit is not recognized if it is set to a recording mode. Set
it to a playback mode. If it is set to card playback mode,
disconnect the USB cable, set [USB FUNCTION] to
[PC CONNECT] and then reconnect the USB cable.
≥ Select another USB terminal on the computer.
≥ Check the operating environment. (l 133)
≥ Turn on the power to this unit.
DVD-RAM or DVD-RW
(VR format) icon is not
displayed on the desktop.
≥ What version of Mac OS X are you using?
# If it is V10.3.x or earlier, the icon is not displayed even if the
disc is recognized by the computer. Use Disk Utility or Apple
System Profiler to verify if the disc is recognized by the
computer.
When Pixe VRF Browser
EX is started, a message
is displayed about
ejecting the disc.
≥ Is there a disc in this unit when Pixe VRF Browser EX is
started?
# Insert the disc after starting Pixe VRF Browser EX.
D250&300(P_PC)eng.book 157 ページ ２００６年１月２０日 金曜日 午後２時３分