Filter
Top Products
98
LSQT1011
Disc and card management
Formatting discs and cards
Disc and card management
Formatting discs and cards
(RAM) (-RW‹VR›) (-RW‹V›)
Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP]
# [FORMATDISC] # [YES] and press the
joystick.
≥ When formatting a DVD-RAM, skip to step 3.
2 (When formatting a DVD-RW only)
Select format type (l 24), then press the joystick.
3 When the confirmation message appears, select [YES], then press the
joystick.
≥ When formatting is complete, press the MENU button to exit the message screen.
≥ In the case of a double sided disc, format each side.
≥ It may not be possible to format a disc with many
scratches or dirt. Such discs cannot be used.
≥ During formatting, do not turn this unit off.
≥ When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
Formatting DVD-RAM:
≥ We recommend formatting on this unit. If formatting
on a computer, use the supplied software. For more
details, refer to the operating instructions of the
software.
If you connect this unit to a computer to format a
DVD-RAM, you cannot use DVDForm (l 112) to
physically format it. Use a separate DVD-RAM drive
to physically format a DVD-RAM.
Formatting DVD-RW:
≥ Format on this unit.
Formatting discs
This is for initializing discs.
D250&300(P_PC)eng.book 98 ページ ２００６年１月２０日 金曜日 午後２時３分