Filter
Top Products
155
LSQT1011
Troubleshooting
Others
Problem Check points
The images on the SD
card do not look normal.
≥ The data may be destroyed. It may have been destroyed by
static or electromagnetic waves. Store important data on a
computer or other products as well.
Even if a disc or a card is
formatted, it cannot be
used.
≥ Either this unit or the disc or card may be damaged. Please
consult a dealer. Use an SD Memory Card from 8 MB to
2 GB with this unit.
The indication
disappears.
The screen is frozen.
No operation can be
performed.
≥ Is this unit connected to a computer?
# No operation can be performed on this unit when it is
connected to a computer.
≥ Turn off the power to this unit. If the power cannot be
turned off, press the RESET button, or remove the battery
or AC adaptor and then reattach it. After that, turn on the
power again. If normal operation is still not restored,
detach the power connected, and consult the dealer who
you purchased this unit from.
“PUSH THE RESET
SWITCH.” is displayed.
≥ The unit has automatically detected an error. Press the
RESET button with the projecting part of the grip belt A.
This will restart the unit.
≥ If you do not press the RESET button, the power to this
unit is turned off automatically about 1 minute later.
≥ Even after you press the RESET button, the indication may
still appear repeatedly. If so, this unit needs repair. Detach
the power connected, and consult the dealer who you
purchased this unit from. Do not attempt to repair the
appliance by yourself.
A
D250&300(P_PC)eng.book 155 ページ ２００６年１月２０日 金曜日 午後２時３分