Filter
Top Products
78
LSQT1011
Playback
Motion picture playback
Recorded scenes are grouped by date on this unit.
Scenes recorded on the same day can be played back in succession.
1 Press the MENU button, then select
[PLAYSETUP] # [PLAYMODE] #
[BY DATE] and press the joystick.
≥ When [PLAY MODE] is set to [VIEW ALL], all recorded motion
pictures will be played back in succession. ([ ALL] is
displayed.)
2 Select the date for playback, then press the
joystick.
The scenes recorded on the same day are displayed as thumbnails.
3 Select the scene to be played back.
≥ Even if scenes are recorded on the same day, they are grouped separately in the following cases.
– When the number of scenes exceeds 99 (RAM) (-RW‹VR›) (-RW‹V›) (-R)
– When the disc is removed (-RW‹V›) (-R)
– When the [ASPECT] setting is changed (-RW‹V›) (-R)
– When the disc is repaired (-RW‹V›) (-R)
– When the mode dial is switched (-R)
– When the power is turned off (-R)
Press the MENU button, then select
[PLAYSETUP] # [RESUMEPLAY] # [ON] and
press the joystick.
If playback of a motion picture is stopped, [R] appears on the thumbnail
view of the stopped scene.
≥ If playback is stopped at any point during a motion picture while
[RESUME PLAY] is set to [OFF], the next time the motion picture is played back, it will be from
the beginning.
≥ The resume position memorized is cleared if you
turn off the power or operate the mode dial. (The
[RESUME PLAY] setting is kept.)
Playing back motion pictures by date
Resuming the previous playback
D250&300(P_PC)eng.book 78 ページ ２００６年１月２０日 金曜日 午後２時３分