Filter
Top Products
46
VQT4C76
≥ Change the mode to or .
1 Set [QUICK START] to [ON].
2 Close the LCD monitor and retract the viewfinder.
The status indicator A flashes green and the unit goes into Quick Start Standby Mode.
≥ The lens cover does not close.
3 Open the LCD monitor or extend the viewfinder.
The status indicator A lights red and the unit is put into recording pause.
≥ Quick Start Standby Mode is canceled if
jabout 5 minutes elapsed
jmode is set to
≥ Depending on the recording conditions and menu settings, time for Quick Start may be
longer than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥
If [ECONOMY (BATT)] (l 45)/[ECONOMY (AC)] (l 45) is set to [ON] and the unit
automatically goes into Quick Start Standby Mode, close the LCD monitor and viewfinder
and then open the LCD monitor or extend the viewfinder again.
If [ECONOMY (BATT)] (l 45)/[ECONOMY (AC)] (l 45) is set to [ON] and the unit
automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it
again.
≥ Turn the unit off using the power button.
≥
Quick Start Standby Mode cannot be released by the remote control.
HC-X900M
HC-X800
HC-X900M
HC-X800
HC-X900M
HC-X800
HC-X900M
HC-X900M&X800P&PC&PU-VQT4C76_mst.book 46 ページ ２０１２年１月１１日 水曜日 午後１０時６分