Panasonic HC-X900M Camcorder User Manual


 
64
VQT4C76
This is for recording still pictures using the timer.
The icon changes each time it is touched.
Ø10 (Records after 10 seconds) # Ø2 (Records after 2 seconds) # setting canceled
When the button is pressed, a still picture is recorded after the Ø10 or Ø2 display
and the recording lamp flashes for the time which has been set. After recording, the Self-
timer is canceled.
In Auto Focus Mode, if the button is pressed halfway once and then fully, the lens
focuses on the subject when the button is pressed halfway. If the button is pressed
fully all at once, the lens focuses on the subject just before recording.
To stop the timer midway through
Touch [CANCEL].
Setting the Self-timer to Ø2 is a good way to prevent image shake when the button is
pressed while using a tripod etc.
Self-timer can be stopped midway by pressing MENU on the remote control.
This brightens dark areas so the image can be recorded clearly.
If there are extremely dark parts or the brightness is insufficient, the effect may not be clear.
This makes the image brighter to prevent darkening of a backlit subject.
A more impressive image can be obtained by focusing on the object only in close-up
and shading off the background.
The unit can focus on the subject at a distance of approx. 95 cm (38q).
When the Tele Macro is set with the zoom magnification less than 12k, it will automatically
be set to 12k.
Tele Macro function is
canceled
when the zoom magnification becomes lower than 12
k
.
Self-timer
Intelligent Exposure
Backlight Compensation
Tele Macro
HC-X900M
HC-X900M&X800P&PC&PU-VQT4C76_mst.book 64 ページ 2012年1月11日 水曜日 午後10時6分