Filter
Top Products
122
VQT1N74
Auto focus function does
not work.
≥ Set the AUTO/MANUAL/FOCUS switch to AUTO.
≥ If you are trying to record a scene which is hard to bring into
focus in auto focus mode, use the manual focus mode to
adjust the focus. (l 62, 132)
Recorded still pictures
are not clear.
≥ If you are trying to record small or finely detailed objects
with [PICT.QUALITY] set at [ ], the images may break up
into a mosaic-like pattern. Record with [PICT.QUALITY] set
at [ ] instead. (l 45)
Some playback images
are skipped
automatically.
≥ The playmode is set to (Intelligent scene selection).
Change the playmode to (All scenes). (l 70)
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are squeezed
horizontally.
≥ Please read the operating instructions of your TV and
select the channel that matches the input used for the
connection.
≥ Change the [TV ASPECT] setting to match the aspect ratio
of the TV.
≥ If both HDMI mini cable and component cable are
connected, set the unit to playback mode.
Scenes cannot be
deleted.
≥ Protected scenes cannot be deleted. Release the protect
setting. (l 77)
≥ Any scenes/still pictures where the thumbnails are
displayed as cannot be deleted. If the scenes/still
pictures are unnecessary, format the SD card or HDD to
erase the data. (l 81) Please be aware that if an SD card
or HDD is formatted then all the data recorded on the SD
card or HDD is erased and cannot be recovered. Back up
important data on a PC, DVD disc etc.
≥ If the SD card’s write protect switch is set to LOCK, then
deletion is disabled. (l 26)
The images on the SD
card do not look normal.
≥ The data may be destroyed. It may have been destroyed by
static or electromagnetic waves. Back up important data on
a PC, DVD disc etc. as well.
If the SD card is inserted
in this unit, it is not
recognized.
≥ If the SD card is formatted on a PC, it may not be
recognized by this unit. Use this unit to format SD cards.
(l 81)
Problem Check points
HDCHS9P-VQT1N74_ENG.book 122 ページ ２００７年１２月２５日 火曜日 午後８時４３分