Filter
Top Products
62
VQT1N74
Portrait mode
≥ If this mode is used indoors, the screen may
flicker. If so, change the scene mode setting to
[OFF].
Spotlight mode
≥ If the recording subject is extremely bright, the
subject may become washed out and the
periphery extremely darkened.
Surf & snow mode
≥ If the subject is extremely bright, the recorded
image may become washed out.
If auto focusing is difficult due to the conditions, then use manual focus.
≥ Set the AUTO/MANUAL/FOCUS switch to MANUAL. (l 61)
1 (When MF assist function is used)
Select the menu. (l 29)
≥ This function’s default setting is [ON].
2 Move the switch down and set it
to FOCUS position.
The manual focus indication [MF] and the icon
shown in the illustration appear.
3 Move the cursor button to bring
the subject into focus.
The center of the screen is enlarged. The normal
screen returns approximately 2 seconds after
you finish bringing the subject into focus.
≥ The center of the screen is not enlarged when
[MF ASSIST] is [OFF].
≥ Move the AUTO/MANUAL/FOCUS switch
down again to the FOCUS or AUTO position to
restore to the automatic adjustment.
≥ MF assist does not work if the zoom
magnification is more than 10k.
≥ The part of the screen that is enlarged is not
enlarged on the image actually recorded.
≥ The zebra pattern does not appear on the part
of the screen that is enlarged when [ZEBRA] is
[ON].
Manual focus adjustment
[ADVANCED] # [MF ASSIST] # [ON]
AUTO
MANUAL
FOCUS
HDCHS9P-VQT1N74_ENG.book 62 ページ ２００７年１２月２５日 火曜日 午後８時４３分