Panasonic HDC-HS9P Camcorder User Manual


 
64
VQT1N74
Shutter Speed:
Adjust it when recording fast-moving subjects.
Aperture:
Adjust it when the screen is too bright or too dark.
Set the AUTO/MANUAL/FOCUS switch to MANUAL. (l 61)
1 Move the cursor button to select
[ ] (aperture) or [ ] (shutter
speed).
2 Make the adjustment.
A Shutter speed:
1/30 to 1/8000
If [AUTO SLOW SHTR] is set to [OFF], the
shutter speed will be set between 1/60 and
1/8000.
If [24pDIGITAL CINEMA] is set to [ON], the
shutter speed will be set between 1/24 and
1/8000. (When [AUTO SLOW SHTR] is set to
[OFF], the range is 1/48 to 1/8000.)
The shutter speed closer to 1/8000 is faster.
B Iris/Gain value:
CLOSE # (F16 to F2.0) # OPEN # (0dB to
18dB)
Value closer to [CLOSE] darken the image.
Value closer to [18dB] brighten the image.
When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
Set the AUTO/MANUAL/FOCUS switch to
AUTO to restore to automatic adjustment.
When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
Manual shutter speed adjustment
Avoid recording under fluorescent light,
mercury light or sodium light because the color
and brightness of the playback image may
change.
If you increase the shutter speed manually, the
noise on the screen may increase.
You may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject, but this is not a
malfunction.
During normal playback, image movement
may not look smooth.
When recording in an extremely bright place,
the screen may change color or flicker. If so
adjust the shutter speed manually to [1/60] or
[1/100].
Manual iris/gain adjustment
If the gain value is increased, the noise on the
screen increases.
Depending on the zoom magnification, there
are iris values that are not displayed.
Manual shutter speed/aperture adjustment
HDCHS9P-VQT1N74_ENG.book 64 ページ 2007年12月25日 火曜日 午後8時43分