Panasonic HDC-HS9P Camcorder User Manual


 
88
VQT1N74
If the TV has two or more HDMI input terminals, it is recommended to connect this unit to HDMI2 or
HDMI3.
VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV for
how to set etc.)
If you are not using VIERA Link, set [VIERA Link] to [OFF].
Other linked operations
Turning the power off:
If you use the remote control for the TV to turn off the power, the power on this unit also turns off. (When
recording motion pictures, formatting, deleting, recovering or connecting the unit to a PC with a USB
cable, the power will not turn off.)
Automatic input switching:
If you connect with a HDMI mini cable and then turn on the power on this unit, the input channel on the
TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn on
automatically (if [Set] has been selected for the TV’s [Power on link] setting).
Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In this
case, use the remote control for the TV to switch the input channel. (For details on how to switch
input, please read the operating instructions for the TV.)
If VIERA Link does not work properly, refer to page 124.
If you are unsure whether or not the TV and AV amplifier you are using are compatible with
VIERA Link, read the operating instructions for the devices.
Available linked operations between this unit and a Panasonic TV is different depending on the types
of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating instructions of
the TV for the operations that support on the TV.
Operation is not possible with a cable that is not based on the HDMI standard.
We recommend using Panasonic HDMI mini cables.
Part numbers: RP-CDHM15 (1.5 m/4.9 feet), RP-CDHM30 (3.0 m/9.8 feet)
HDCHS9P-VQT1N74_ENG.book 88 ページ 2007年12月25日 火曜日 午後8時43分