Filter
Top Products
12
Backup recording of data output
from the IEEE 1394 interface
Footage recorded on the AG-HPX500 can be
recorded and backup copies made on an
external device such as an HDD connected to
the IEEE 1394 interface.
OTHER FUNCTIONS
1394 CONTROL
Specialized P2 hard disk unit:
FOCUS FS-100
External hard disk
Control settings for connected backup devices
Setting the connected backup device to quit operation when the
camera's START/STOP button is pushed
(Equipped with 4 modes)
OFF: Quit control of connected backup
device
EXT: Control connected backup device
using the camera START/STOP button.
Recording operations cannot be carried
out within the camera itself when in this
mode.
BOTH: Record simultaneously onto both
the camera and the connected backup
device.
CHAIN: Connected backup device
begins to record automatically when
recording capacity of the P2 cards fall to
a low point during recording.
OTHER FUNCTIONS
1394 CMD SEL
REC_P: Pauses during recording
STOP: Stops recording
Connecting to an external tape deck (AJ-HD1400)
(When storing data on a DVCPRO HD tape, etc.)
Note) When the connected backup device is not
equipped with a Record Pause function, choose STOP.
Note) One-shot REC, loop REC, interval REC data cannot
be backed up using the IEEE 1394 interface.