Panasonic P2HDXAG-HPX500 Camcorder User Manual


 
Special Recording
7
Special Recording
Pre-REC/One-Shot/Loop REC/Interval REC
P2HD
X
AG-HPX500
PRACTICAL GUIDEBOOK
15
This allows you to record video and
audio for a set period prior to the
record button actually being pressed
(approx. 3 seconds for HD recording
and approx. 7 seconds for SD
recording).
(1)OPERATION TYPE
(2)Recording formats
VIDEO CAM mode
1080/60i, 1080/50i, 1080/30p, 1080/25p, 720/60p, 720/50p
720/30p, 720/25p, 576/50i, 576/25p, 480/60i, 480/30p
*1) To pause Loop recording, you can stop recording using the Start/Stop trigger, but to release the Loop recording you
need to select NORMAL in the REC FUNCTION settings.
*2) Use at least two P2 cards each has 1 minute or more of remaining recording time.
*3) Recording stops when either P2 card is removed.
One-shot recording
This mode records certain frames by setting. This mode is like a still camera mode.
Loop Recording
If you are inserting 2 or more P2 cards into the slots, this mode lets you record indefinitely by successively
switching cards until you are ready to stop. This is especially effective for shooting fixed-point observations.
Note) Files recorded during One-shot recording are collected together into a single file.
Note) Pre-REC does not work in the following shooting modes:
•When recording through IEEE 1394 input •Starting to record during playback •During interval recording
•During One-shot recording •During Loop recording
Special recording requirements: Recording is possible in the conditions below.
AG-HPX500 has some other special recording modes.
Pre-REC