Panasonic AG-DVC10 Camcorder User Manual


 
-81-
FRANÇAIS
ENGLISH
Indications in the Finder
1 Remaining Battery Power
As the remaining battery power decreases, the
indication changes as follows:
u v w x y
When the battery is completely discharged, the
x y ) Indication flashes.
(When you are using the AC Adapter, the v
Indication may appear, however, this has no meaning
in this case.)
2 Remaining Tape Time
The remaining tape time is displayed in minutes.
(When it becomes less than 3 minutes, the indication
starts to flash.)
¡ If a recording lasts less than 15 seconds, the
Remaining Tape Time cannot be displayed
correctly.
¡ The displayed remaining tape time may be shorter
than the actual remaining tape time.
3 Wide-Screen Mode (m 22)
When recording in the Wide Mode, this indication is
displayed.
4 Digital Zoom (m 20)
When the Digital Zoom Function is activated, this
indication is displayed.
Digital functions (m 38)
When a Digital function is activated, the
corresponding indication is displayed.
SP
0:00.00
R0:45
REC
WIDE
D.ZOOM
10 t T
r
1
2
3
4
W
1
Indications dans le viseur
1 Energie restant dans la batterie
Au fur et à mesure que l’énergie restant dans la
batterie diminue, l’indication change de la manière
suivante:
u v w x y
Lorsque la batterie est complètement déchargée,
l’indication x (y) clignote.
(Lorsqu’on utilise le bloc d’alimentation/charge, il est
possible que l’indication v apparaisse; toutefois,
ceci peut être ignoré dans ce cas.)
2 Temps restant sur la bande
Le temps restant sur la bande apparaît en minutes.
(Lorsque ce temps devient inférieur à trois minutes,
l’indication se met à clignoter.)
¡ Si un enregistrement dure moins de quinze
secondes, le temps restant sur la bande ne pourra
pas apparaître correctement.
¡ Il est possible que le temps restant sur la bande
indiqué soit plus court que le temps restant sur la
bande réel.
3 Mode denregistrement grand écran (m 22)
Lorsqu’on enregistre en format grand écran, cette
indication apparaît.
4 Zoom numérique (m 20)
Lorsque la fonction de zoom numérique est activée,
cette indication apparaît.
Fonctions numériques (m 38)
Lorsqu’un effet numérique est activé, l’indication
correspondante apparaît.