Filter
Top Products
35
QR34642
To use as a Hand Strap
Using the Grip Belt as the hand strap makes it easier to carry the DVD Palmcorder.
1 Detach the tip of the Grip Belt from the Lens Cap
String Holder and adjust the length of it.
2 Attach the Grip Belt around your wrist.
Attaching Shoulder Belt
Attaching Lens Cap
Pass the provided string through the hole in the Grip Belt Attachment part and pass it through the hole
in the lens cap.
1 Pass the one end of the Lens Cap String through
the hole in the Grip Belt Attachment part. Then
pass the other end of the String through the loop
made by the string itself and pull tight.
2 Pass the end of the Lens Cap String through the
Lens cap string holder. Then pass the Lens cap
through the Lens Cap String.
3 Push the both sides of cap inward and attach it
over the lens.
Note:Note:
• Always keep the lens cap on when not using the DVD
Palmcorder, to protect the lens.
• When recording, attach the lens cap to the grip belt by
hooking the tab inside the cap onto strap for comfortable
shooting.
Pass the Shoulder belt through
the Shoulder belt attachments.
Be sure to pass through the 2 slots.
Push and fit
VDR-M30PP_GB.book Page 35 Friday, March 14, 2003 8:53 PM