Filter
Top Products
42
QR34642
Using DVD Palmcorder with AC Adapter/Charger
It is recommended that you use the AC adapter/charger to power the DVD Palmcorder from household
AC outlet when you perform settings on it, play back or edit images, or use it indoors.
Note:Note:
Be sure to use the specified AC adapter/charger to power the DVD Palmcorder. Using other AC adapter/chargers could
cause electric shock or result in fire.
1 Connect the power cable to AC adapter/
charger.
2 Plug the power cable into AC outlet.
3 Plug one end of DC cord into the DC output jack
on AC adapter/charger.
4 Attach the other end of DC cord to the battery
attachment platform on DVD Palmcorder.
Note:Note:
• The AC adapter/charger can be used around the world.
An AC plug adapter is required in some foreign countries.
If you need one, purchase it from your distributor.
• If the CHARGE indicator does not light when the AC
adapter/charger is plugged into AC outlet, unplug it from
the AC outlet, wait a few moments, and then plug it into
the AC outlet again. If the CHARGE indicator still does not
light, the AC adapter/charger may be faulty. Unplug it
from the AC outlet and call 1-800-211-PANA for support.
Power cable
AC adapter/charger
DC cord
AC 200-240V
AC Plug Adapter (not supplied)
VDR-M30PP_GB.book Page 42 Friday, March 14, 2003 8:53 PM