68
QR34662
Recording Images from AV Device
1 Set the input source on the
DVD Palmcorder to
“LINE (L IN)”.
Switch the input referring
to “Input Source” on
page 90.
2 Turn on the connected device, and start
playback.
The picture will appear on the LCD screen or
viewfinder of this DVD Palmcorder.
3 Press the REC button.
Recording will start on this DVD Palmcorder.
The operation of this line-input recording is the
same as for recording movie.
Note:
• The recorded contents can be played back in the same
manner as when playing back camera images recorded
on this DVD Palmcorder.
• Still images can also be recorded on DVD-RAM disc or
card. See “Switching External Input Recording Method
(PHOTO Input)” on page 90 for details, and “Recording
Stills” on page 55 for how to record still images.
• The “Input Source” setting will return to “CAMERA”
whenever DVD Palmcorder is turned off.
• Recording of most images is prohibited by the copy-
guard signal to protect the copyright, except for images
recorded on camcorders for personal enjoyment. “COPY
PROTECTED” appears in these images: They cannot be
recorded on this DVD Palmcorder.
Typical copyright protected images include those of DVD
video, LD, recorded video tapes, some parts of digital
satellite broadcasts, etc.
• If a video signal that cannot be read by this DVD
Palmcorder is present - even in images recorded on
camcorder for personal enjoyment without copy-guard
signal - the input image may not be recorded normally.
• If the input signal is interrupted by switching the channel
on TV or switching the signal using video selector, normal
recording cannot be performed.
3 0 MIN
0:00:00
REM
FINE
L IN
8:00AM
SEP 30 2003
VDR-M30PP_GB.book Page 68 Friday, March 14, 2003 8:53 PM