Filter
Top Products
Preparation
22
VQT0V40
[ECONOMY]
Press [ ] to display the [SETUP] menu
and select this item. (P19)
Battery life is saved by reducing the
brightness of the LCD monitor and turning
it off automatically when the camera is not
being used in recording mode.
[LEVEL 1]: The LCD monitor turns off if the
camera is not operated for
about 15 seconds in recording
mode.
[LEVEL 2]: The LCD monitor turns off if the
camera is not operated for
about 15 seconds in recording
mode or for about 5 seconds
after taking a picture.
[OFF]: Economy mode cannot be
activated.
• In economy mode, the LCD monitor is
turned off while the flash is being charged.
• The status indicator lights while the LCD
monitor is turned off. Press any button to
turn on the LCD monitor again.
• Power save mode is fixed to [2MIN.] in
economy mode.
[However, power save mode is not
activated when using the AC adaptor
(DMW-AC5; optional).]
• Economy mode will not work in simple
mode [ ], when using the AC adaptor
(DMW-AC5; optional), recording in motion
picture mode, the menu screen is
displayed or the self-timer is set.
[BEEP]
Press [ ] to display the [SETUP] menu
and select this item. (P19)
[]:No operation sound
[]:Soft operation sound
[]:Loud operation sound
• The [BEEP] setting also affects simple
mode [ ].
[SHUTTER]
Press [ ] to display the [SETUP] menu
and select this item. (P19)
Set to select the volume of shutter sound.
[]:No shutter sound
[]:Soft shutter sound
[]:Loud shutter sound
• The [SHUTTER] setting also affects
simple mode [ ].
[VOLUME]
Press [ ] to display the [SETUP] menu
and select this item. (P19)
The volume of speakers can be adjusted in
7 steps from level 6 to 0.
• When you connect the camera to a TV,
the volume of the TV speakers does not
change.
[NO.RESET]
Press [ ] to display the [SETUP] menu
and select this item. (P19)
Set this when you want the file number of
the next recording to start from 0001. (The
folder number is updated and the file
number starts from 0001.)
• A folder number between 100 and 999
can be assigned.
When the folder number reaches 999, the
number cannot be reset. We recommend
formatting the card after saving the data
on a PC or elsewhere.
• To reset the folder number to 100, format
the built-in memory (P91) or the card first
and then use this function to reset the file
number.
A reset screen for the folder number will
then appear. Select [YES] to reset the
folder number.
• Refer to P93 for detailed information about
the file number and the folder number.
• The [NO.RESET] setting also affects
simple mode [ ].
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
VQT0V40ENG.book 22 ページ ２００６年２月２７日 月曜日 午後１時１９分