Panasonic DMC-TZ1 Digital Camera User Manual


 
Advanced
45
VQT0V40
Compensating the
Exposure
Use this function when you cannot achieve
appropriate exposure due to the difference
in brightness between the subject and the
background. Look at the following
examples.
Under exposed
Compensate the exposure towards
positive.
Properly exposed
Over exposed
Compensate the exposure towards
negative.
1 Press 3 [ ] until [EXPOSURE]
appears, compensate the
exposure with 2/1.
You can compensate from [j2 EV] to
[i2 EV] in steps of [1/3 EV].
Select [0 EV] to return to the original
exposure.
2 Press [MENU/SET] to finish.
You can also press the shutter
button halfway to finish.
EV is an abbreviation of [Exposure Value].
It refers to the amount of light given to the
CCD by the aperture value and the shutter
speed.
The exposure compensation value
appears on the lower left of the screen.
The set exposure value is memorized
even if the camera is turned off.
The compensation range of the exposure
will be limited depending on the
brightness of the subject.
Exposure cannot be compensated when
using [STARRY SKY] in scene mode.
SCN1
SCN
2
EXPOSURE
SELECT
EXIT
MENU
VQT0V40ENG.book 45 ページ 2006年2月27日 月曜日 午後1時19分