Filter
Top Products
Menu Settings
83
VQT0V40
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P80)
This mode allows you to automatically
display pictures vertically if they were
recorded holding the camera vertically or
rotate pictures manually in 90° steps.
∫ Rotate display
(The picture is automatically rotated
and displayed.)
1 Press 4 to select [ON] and then
press [MENU/SET].
• The pictures are displayed without
being rotated when you select [OFF].
• Refer to P34 for information about how
to play back pictures.
2 Press [MENU/SET] to close the
menu.
∫ Rotate
(The picture is rotated manually.)
1 Press 2 1 to select the picture
and then press 4.
• The [ROTATE] function is disabled
when [ROTATE DISP.] is set to [OFF].
• Motion pictures and protected pictures
cannot be rotated.
2 Press 3 4 to select the direction
to rotate the picture and then
press [MENU/SET].
3 Press [MENU/SET] twice to close
the menu.
∫ Example
When rotating clockwise ( )
Original
picture
• When [ROTATE DISP.] is set to [ON],
pictures recorded holding the camera
vertically are played back vertically
(rotated).
• If you take pictures when aiming the
camera up or down, it may not be possible
to display the pictures vertically. (P26)
• The picture may be slightly blurred when
the camera is connected to the TV with
the AV cable (supplied) and played back
vertically.
• When you play back pictures on a PC,
they cannot be displayed in the rotated
direction unless the OS or software is
compatible with Exif. Exif is a file format
for still pictures which allows recording
information etc. to be added. It was
[ROTATE DISP.]/[ROTATE]
To display the picture rotated
MENU
SET
PLAY
1
/
3
FAVORITE
DPOF PRINT
ROTATE
ON
OFF
OFF
ON
MENU
SET
SLIDE SHOW
ROTATE DISP.
SET
MENU
SELECT
EXIT
ROTATE
SETSELECT
MENU
100
_
0001
1/3
The picture rotates clockwise in
steps of 90°.
The picture rotates
counter-clockwise in steps of 90°.
MENU
SET
ROTATE
SELECT SET
MENU
CANCEL
VQT0V40ENG.book 83 ページ ２００６年２月２７日 月曜日 午後１時１９分