Filter
Top Products
Advanced
47
VQT0V40
Optical Image
Stabilizer
This mode detects jitter and compensates
for it.
1 Press and hold the optical image
stabilizer button A until
[STABILIZER] appears.
2 Press 3 4 to select the
stabilizer function mode and then
press [MENU/SET].
∫ Demonstration of the optical image
stabilizer (Demonstration Mode)
Press 1 to display the demonstration. After
the demonstration ends, the screen returns
to the stabilizer function mode selection
menu. Press 1 again if you want to exit the
demonstration before it ends. While the
demonstration is displayed, the optical
zoom is fixed to Wide (1k) and the zoom
function cannot be activated. You also
cannot take pictures.
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
• The setting is fixed to [MODE1] in simple
mode [ ], [MODE2] in
[SELF PORTRAIT] (P53) in scene mode
and [OFF] in [STARRY SKY] (P55) in
scene mode. The stabilizer function mode
selection menu does not appear.
• In motion picture mode [ ], [MODE2]
cannot be set.
MODE1
()
The stabilizer operates
continuously and can assist
during photo composition.
MODE2
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
OFF
()
When you want to take a picture
with jitter.
SCN1
SCN
2
STABILIZER
OFF
MODE2
DEMO.
SELECT
SET
MENU
MENU
SET
MODE1
VQT0V40ENG.book 47 ページ ２００６年２月２７日 月曜日 午後１時１９分