Filter
Top Products
33
Digital Features
CAMERA mode
Zoom Out (“W”)
Zoom In (“T”)
5POWER
ZOOM
D.ZOOM
• The normal optical zoom functions from
1X to 10X.
• As magnification increases, resolution
significantly decreases.
• Because the image is enlarged digitally,
the picture may become distorted when
higher magnification levels are used.
• When the level falls below 10X, the
normal zooming function will resume.
• Focus distance becomes 1.2 m (4 feet) if
the lens is in full telephoto.
1 Set POWER to CAMERA.
2 Press MENU to display the CAMERA
FUNCTIONS menu screen.
3 Rotate JOG KEY to select CAMERA
SETUP , then press JOG KEY
to display the CAMERA SETUP menu
screen.
4 Rotate JOG KEY to select D. ZOOM ,
then press JOG KEY to select
25X or 700X.
25X : from 10X to 25X
700X : from 10X to 700X
OFF : Turn off D.ZOOM
• Press MENU to exit.
5 Press REC/PAUSE to start
recording and press POWER ZOOM to
zoom in or zoom out.
• The magnification level is always
displayed in the EVF or the LCD
monitor when DISPLAY is set to ALL
or PARTIAL. (Menu OSD: p. 60)
6 Repeat steps 2~4 to select OFF to
cancel this feature.
• Other Digital Functions are turned off
automatically when the EIS and Digital
Zoom are selected.
Note
Note
1POWER
Digital Zoom
2MENU
3, 4
JOG KEY
This feature is useful when you want to
record close-up shots of subjects located
beyond a normal zoom range of 1X to 10X
magnification. With the digital zooming
feature, you can select a magnification of
25X or even to 700X.
Digital Features
5REC/PAUSE
EVF/LCD
DV53.p33-37.p65 03/01/21, 16:2633