Filter
Top Products
8
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
[ EVF or LCD Monitor ]
Before you begin
• Connect the Palmcorder to a power
source. (pp. 11, 12)
1 Set POWER to CAMERA.
2 Press MENU to display the CAMERA
FUNCTIONS menu screen.
3 Rotate JOG KEY to select OTHER
FUNCTIONS , and press JOG KEY to
display the OTHER FUNCTIONS menu
screen.
4 Rotate JOG KEY to select DEMO
MODE , and press JOG KEY to select
OFF.
• Press MENU to exit.
Before Using
1 Hold down LIGHT for more than
0.7 second to turn ON or OFF.
•“
” will appear on the screen.
To brighten the natural colors in a scene.
Using the Built-in Light
Caution
This light becomes hot during operation.
Make sure nothing covers the light during
operation.
• Using Light reduces battery time.
• Provide adequate ventilation if using
Light in a hot environment for a long time.
• Set LIGHT to OFF when not in use.
• When replacing the bulb, see page 48.
Built-in Light
Note
Before you begin
• Connect the Palmcorder to a power
source. (pp. 11, 12)
• Set POWER to CAMERA.
1LIGHT
Note
1POWER
2MENU
3, 4
JOG KEY
Self Demo Mode
If no operation takes place for approx.
10 minutes after the AC Adaptor was
connected to the Palmcorder and the
POWER Switch was turned to CAMERA
without inserting a Cassette, the
Palmcorder is automatically set to Self
Demo mode for introducing its function.
To turn it off, follow steps 1~4 below.
• If any button is pressed or operated
(except PLAY/MULTI, ZOOM and LIGHT),
the Self Demo mode is canceled.
• The Self Demo mode can be started by
setting DEMO MODE to ON and by
exiting the menu.
To turn Self Demo back on:
• Set to DEMO MODE : ON in MENU
screen.
DV53.p 5-8.p65 03/01/21, 16:258