Panasonic PV-VM202 Camcorder User Manual


 
28
VCR Mode
Playing Back
The recorded scene can be played back immediately after recording.
1
Slide the [OFF/ON/MODE] Switch and set the Palmcorder in
the VCR Mode.
The [VCR] Lamp lights up.
1
2
Press the [6] Button to rewind the tape.
Rewind the tape to the point where you want to start playback.
When the tape reaches the beginning, rewinding stops automatically.
3
Press the [1] Button to start playback.
To Stop Playback
Press the [] Button
2
.
If a Cassette recorded with copyright protection signals is played back, the
screen becomes blue or mosaic-like noise patterns appear.
ªAdjusting the Sound Volume
Until the [VOLUME] Indication
3
appears, keep pressing the [PUSH] Dial
4
. Then, rotate the [PUSH] Dial to adjust the volume. After the adjustment,
press the [PUSH] Dial to make the [VOLUME] Indication disappear.
To adjust the volume with the Remote Controller, press the [T] or [W] Button
to display the [VOLUME] Indication. Press the [T] Button to increase the
volume or press the [W] Button to decrease the volume. The [VOLUME]
Indication goes off 2 or 3 seconds after the adjustment is finished.
When the Playback Zoom Function is in use, the sound volume cannot be
adjusted.
For other notes, see page 62.
~~~~~~~~~~~~~~~~~~~~~~~~
Finding a Scene You Want to Play Back
ªCue/Review Playback
Cue Playback
A
Press the [5] Button
1
during playback.
Review Playback
B
Press the [6] Button
2
during playback.
If the Button is held continuously, it turns to Cue Playback or Review
Playback until you release it.
If the Button is pressed briefly, Cue Playback or Review Playback continues
even when it is released.
ªHyper Check Function
If you press the [5] Button during fast-forwarding of the tape or the [6]
Button during rewinding of the tape, Cue Playback or Review Playback
continues for as long as the Button is held down.
ªVariable Speed Search Function
The speed of Cue Playback or Review Playback can be varied.
1
During playback, press the [1] Button.
[1k!] Indication appears.
C
2
Rotate the [PUSH] Dial and select a desired search speed.
The following 6 playback speeds are available for the Variable Speed Search
Function in both the fast-forwarding and rewinding directions. 1/5k (slow
playback, SP mode only), 1/3k (slow playback, LP mode only),1k, 2k, 5k,
10k, and 20k.
The same setting can be performed using the Remote Controllers the
[VAR.SEARCH] Button, the [π] Button and the [] Button.
Resuming Normal Playback
Push the [1] Button.
During Cue or Review Playback, fast-moving images may show mosaic-like
noise patterns. This is not a malfunction.
The sound is muted during search.
ªRepeat Playback
If you hold down the [1] Button for 5 seconds or longer, the Palmcorder
switches to Repeat Playback Mode, and the [R !] Indication appears
D
.
(To cancel Repeat Playback Mode, set the [OFF/ON/MODE] Switch to
[OFF].)
3
4
CAMERA
CARD P. B.
VCR
1
1
W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH
12
2
2
3
OFFON
MODE
BACKLIGHT
CAMERA
STILL
POWER
A
C
B
D
R!
!
2
W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH
12
1
2
1
BACKLIGHT
CAMERA
STILL