Panasonic PV-VM202 Camcorder User Manual


 
40
ªTo Select a Desired File and Play it Back
After setting the Palmcorder to the Card Playback Mode (l 39).....
1
Slide the [STILL/MPEG4/VOICE] Selector to desired type of
data.
2
Press the [MULTI] Button.
The files recorded on the Memory Card are displayed in Multi-Picture
Mode.
1
3
Rotate the [PUSH] Dial and select a desired file.
The selected file is marked with a red frame.
When 7 or more files have been recorded, rotate the [PUSH] Dial to
display the next file. The [6] Button or [5] Button can be used
instead of the [PUSH] Dial.
4
Press either the [PUSH] Dial or the [MULTI] Button.
The selected file is shown on the entire screen.
2
File Size (When [STILL] is selected at Step 1)
3
File Number
4
Folder-File Number (When [STILL] or [MPEG4] is selected at Step 1)
ªUsing File Search Mode
1
11
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[FILE SEARCH] >> [YES].
The file search screen
5
appears.
2
22
2
Rotate the [PUSH] Dial to select the desired number of the
file and then press it.
The selected numbers file appears.
The same process can be performed using the short-cut menu (l 18).
For other notes, see page 63.
~~~~~~~~~~~~~~~~~~~~~~~~
Copying pictures on a Memory Card to a
Cassette
After setting the Palmcorder to the Card Playback Mode (l 39).....
To Copy One Picture
1
Slide the [TAPE/CARD] Selector to [TAPE].
2
Slide the [STILL/MPEG4/VOICE] Selector to [STILL].
3
Display a desired picture.
Please refer to To select a Desired File and Play it Back”.
4
Press the [PHOTO SHOT] Button.
It takes approximately 7 seconds to copy a still picture to the Cassette.
During the copying, the indication
1
appears.
To Copy All the Pictures
1
11
1
Display the first picture.
If a picture other than the first one is displayed, only the subsequent
pictures will be copied.
2
22
2
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[RECORD TO TAPE] >> [YES].
It takes approximately 7-11 seconds for each picture to be copied to the
cassette. To stop the copying midway, press the [] Button.
During the copying, the indication
1
appears.
When recording to tape, select the tape position before recording. The
picture will be recorded to the tape position when the [PHOTO SHOT]
button is pressed at step 4.
When pictures with a size other than [640k480] are copied to the cassette,
their pictures quality will deteriorate slightly.
Picture size recorded on tape is [640k480]. (Cannot save as mega-pixel
still picture)
Moving Picture (MPEG4) and Voice data cannot be recorded from a card to
tape.
When recording the Card Images on a Tape, a PhotoShot index signal is
automatically recorded with a picture.
Even if you edit the Slide Show, it is not applied to the order in copying the
pictures.
For other notes, see page 62.
1
NOW RECORDING
REC
4
PHOTO
SHOT
W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH
12
1
TAPE
CARD
ACCESS
CAMERA
CARD P. B.
VCR
RESET
2
STILL MPEG4 VOICE
CARD
MODE
OFFON
MODE
POWER
ACCESS
CAMERA
CARD P. B.
VCR
RESET
1
3, 4, ,
W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH
12
2,
4
1
2
5
PICTURE
No.25 100-0012
640
640
1200
640
640
1200
No
.
3
FILE SEARCH
PUSH MENU TO RETUR
STILL MPEG4 VOICE
CARD
MODE
OFFON
MODE
34
BACKLIGHT
CAMERA
STILL
POWER