Filter
Top Products
38
ªRecording Moving Pictures (MPEG4)
You can record moving pictures for e-mailing on a Memory Card. The
recorded data can be also played back on Windows Media Player.
Recording from the Palmcorder Lens (Camera Mode)
1
Slide the [TAPE/CARD] Selector to [CARD].
2
Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3
Press the Recording Start/Stop Button.
≥It takes 2 to 3 seconds to start recording.
≥During recording, the [ ] Indication is lit in red.
≥The maximum continuous recording time is 60 minutes.
The Palmcorder will automatically stop recording when the relevant
time listed above has elapsed.
≥When Remaining Time Indication becomes [R:0h00m],
[NO SPACE LEFT] Indication appears. Recording may not be started.
≥The shutter speed is adjustable within the range of 1/60 to 1/500 while
recording moving pictures (MPEG4)
.
≥The picture size of the moving picture (MPEG4) is set to be [176k144].
≥When attaching to email, we recommend the picture size to be less than
1MB (about 1 minute length).
≥The following functions are disabled.
≥Digital Zoom (l 22)
≥Cinema Function (l 23)
≥Digital Effect Functions (l 26)
≥Title In/Creation (l 42)
≥Fade In/Out Function (l 22)
Recording from a Cassette (VCR Mode)
1
11
1
Slide the [TAPE/CARD] Selector to [CARD].
2
22
2
Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3
33
3
Start playback and press the Recording Start/Stop Button at
the desired scene.
Recording from other equipment
1
Slide the [TAPE/CARD] Selector to [CARD].
2
Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3
Input the image from other equipment then press the
Recording Start/Stop Button at the desired scene.
Maximum recording time on the supplied Card (16 MB)
Approximately 15 minutes
≥The video resolution of the camera is reduced when making a MPEG4
recording. This is done in order to optimize the image quality in MPEG4
recordings, and does not reflect a problem with the software or hardware.
≥For other notes, see page 63.
ªRecording Voice
(Voice Recording Function)
You can record voice data on a card.
1
Slide the [TAPE/CARD] Selector to [CARD].
2
Slide the [STILL/MPEG4/VOICE] Selector to [VOICE].
3
Press the Recording Start/Stop Button.
≥Voice from built-in microphone is recorded.
≥It takes 2 to 3 seconds to start recording.
≥The recorded file is automatically locked (to prevent accidental
erasure).
≥During recording, the [ ] Indication is lit in red.
≥If a card is not inserted, the Indication flashes in red.
≥When Remaining Time Indication becomes [R:0h00m],
[NO SPACE LEFT] Indication appears. Recording may not be started.
≥For other notes, see page 63.
MPEG
4
MPEG
4
VOICE
VOICE
R: 0h20m
TAPE
CARD
2, ,
2
1, ,
1
3, ,
3
STILL MPEG4 VOICE
CARD
MODE
TAPE
CARD
2
1
3
STILL MPEG4VOICE
CARD
MODE
R: 0h20m