Filter
Top Products
49
TO PC
4)
3)
2)1)
Using the Supplied USB Connection Kit
ªOperating environment
USB Driver can be installed in a PC/AT compatible personal computer
which can run Microsoft Windows
®
XP, Windows
®
Me, Windows
®
98SE,
Windows
®
2000 Professional.
≥USB Driver
For Windows
®
≥IBM PC/AT or compatible
≥Intel
Pentium
ll
Processor: 300 MHz or higher CPU recommended
≥Microsoft Windows
®
XP, Windows
®
Me, Windows
®
98SE, Windows
®
2000
Professional pre-installed PC with USB port
≥Video card that supports16 bit color at 800k600 monitor resolution
≥RAM: 64 MB or more
≥2 MB minimum available hard disk space
≥Disk drive: CD-ROM drive
≥Ports: USB Terminal
≥Other requirements: Mouse or other pointing device
~~~~~~~~~~~~~~~~~~~~~~~~~
Installing USB Driver
In order for USB Driver to be installed, the hard disk must have at least 2 MB
of free space. Before proceeding with installation, check out the amount of
free space on the hard disk.
1
Insert supplied CD-ROM into the CD-ROM drive.
≥[Setup Menu]
1
appears.
2
Select the software to be installed from [Setup Menu].
≥The set up program starts running.
3
Finish installation by following the on-screen instructions.
≥Carefully read the license agreement on the window, and if you agree
click [Yes]. Software is not installed if [No] is clicked.
4
Click [OK] when the [Restarting Windows] Dialog appears.
≥Reboot the computer to finish installing USB driver.
≥Installation continues after the computer reboots if you selected
additional software.
≥If you no longer need the driver, see page 55.
≥Update the driver after upgrading the OS.
~~~~~~~~~~~~~~~~~~~~~~~~~
Connecting Computer and Palmcorder
Install USB Driver (above) before connecting.
Before making these connections, turn off all devices which are to be
connected.
1
Install the supplied USB Driver. (above)
2
Insert memory card into Palmcorder, then set card playback
mode.
3
Use auxiliary USB Connection Cable to connect.
≥PC connecting mode.
1) Palmcorder
2) USB Connection Cable
3) USB terminal
4) Personal computer (not supplied)
≥After making the connections, turn the connected equipment on.
≥Appropriate driver to recognize Palmcorder is automatically installed by
Windows Plug’n Play when connected first time.
≥When using the USB Connection Kit, use of the AC Adaptor is
recommended to use as the power supply of the Palmcorder.
≥After the USB Driver is installed and USB Connection Cable is connected to
the Palmcorder, open [My computer] or [Windows Explorer] to check the
drive is displayed as a removable disk drive (only when card is inserted into
the Palmcorder). It enables you to operate like a floppy disk drive, and you
can use the same drag and drop or copy methods.
4
VFA0366
LSFT0489
1
1