Filter
Top Products
Useful Features (continued)
g
FADE BuI"rON_
HIGH SPEED SHUTTER
SWITCH
_SELF TIMER/TIME LAPSE
__ SWITCH
-Fade In/Out - Video Only; Audio Is Not Affected By Fade Control
FADE IN
FADE OUT
Use the Fade button to activate the fade feature•
The picture will fade out when the Fade button is
held down. When the button is released, the picture
will fade in, eliminating sudden scene changes.
Fade in: Before starting a recording segment, hold
down the Fade button until the picture
fades out. Then press the Record/Pause
button to start the recording, as you
release the Fade button. The new scene
will fade in.
Fade Out: To fade out at the end of a recording
segment, hold down the Fade button.
When the picture has faded out, press
the Record/Pause button to pause the
recording.
-High Speed Shuffer
Select The 1/500th Shutter
1/5_
Select The l!1000th Shutter
1/1000 l
This switch may be used to record a clear, sharp
image of high speed motion for fine point replay in
still or slow mode, when watching the tape on
Panasonic TECH 3 or TECH 4 VCR (3 or 4 head
VCR). There are 2 Shutter speeds available.
Slide the switch to the right once to activate the
High Speed Shutter during recording. This mode
should be used for subjects moving fast enough to
cause blurs.
Slide this switch to the right once more to select the
1/1000 shutter speed.
This mode should be used for extremely fast
motions, like a golf swing.
Note:
eThe High Speed Shutter indicator flashes when
the light level is inadequate, More light should be
provided to achieve better picture quality and
color. See page 32 for more information,
23