Filter
Top Products
-14-
PRIOR TO SETUP
This section describes setup procedures common to
accesses from the PC and from the camera. The PC
can control more functions than camera itself, e.g.
transmitting images to FTP server, sending alarm notice
mail, auxiliary device control, clock setup, and LED
control.
Buttons Used for Setup Menus
Press the buttons on the side panel of the camera, or
click the buttons on the computer display. Each button
is assigned functions in the setup as follows.
Camera Setup Menus
¡From the PC
1. Open the main page of the WV-NP472 camera,
referring to page 12.
Login as a level-1 administrator in the dialog box if
requested.
2. Click Camera Setup button in the left side of the
screen.
Login dialog box will appear.
Menu ON/OFF button: Opens or closes the setup menu.
ESC button: Returns to the previous menu
(one layer higher) .
UP/DOWN button:
Moves up and down
the cursor (pointer).
RIGHT/LEFT button:
Selects parameters,
adjusts some levels.
SET button: Validates
the selection, opens a
detailed menu.
Pressing RIGHT, SET,
LEFT or clicking ALL
RESET: Resets all settings
to the factory default.
Pressing RIGHT and LEFT, or clicking
RESET: Resets the selected settings to
the factory default.
Note: Confirm the entered IP address when neither
the dialog box nor the main page appears. You
may need to re-enter the IP address.
3. Enter the registered user name and password.
Note: Enter “admin” when you operate the system
very first time, or you have not registered user
names yet. For this time, you need not to enter
the password.
Menu control buttons will appear under the camera
image. Scroll down the bar to display the Reset
buttons.
4. Click the Menu ON button to overlay the **SET
UP** menu on the camera image. The cursor is
highlighted on the window.
5. Move the cursor to SETUP DISABLE if it is dis-
played, or skip to step 7 if ENABLE is displayed.
6. Click the ENTER button.
DISABLE will change to ENABLE, and the camera
is now ready to be set up.
Note: While DISABLE is displayed, setup opera-
tions are disabled.