Filter
Top Products
-15-
7. Move the cursor to CAMERA O, and click the
ENTER button. CAM SETUP opens.
Notes:
• Refer to the next page for setup operations.
• Return the menu to ** SET UP *** (step 3
above), then go to step 8.
8. Click the Menu OFF button after finishing the setup
operations.
The changed settings will be stored in the camera,
and the overlaid camera menu will disappear.
Notes:
• Access the camera again on the WWW-brows-
er to validate the settings for PC oriented items
if the browser screen pauses.
• You can exit from the camera setup by clicking
the Return button, though the menu is dis-
played if the Menu OFF button has not been
clicked yet.
¡From the Camera
1. Hold down the I button for 2 seconds.
The ** SET UP ** will appear, overlaid on the cam-
era image.
2. Move the cursor to SETUP DISABLE.
3. Press the I button.
DISABLE will change to ENABLE, and the camera
is now ready to be set up.
Note: While DISABLE is displayed, setup opera-
tions are disabled.
4. Move the cursor to CAMERA O, and press the I
button. The CAM SETUP opens.
Notes:
• Refer to the next page for setup operations.
• Return the menu to the one in which END is
displayed on the bottom, then go to the next.
5. Move the cursor to END, and press the I button
after finishing the setup.
The changed settings will be stored in the camera,
and the overlaid camera menu will disappear.
Left Button
Set Button
Right
Button
Down
Button
Up
Button
** SET UP **
CAMERA
NETWORK
END SET UP DISABLE
↵
↵