Filter
Top Products
8
!9 Audio output button (*3)
Turns on/off the audio transmission (play audio from
the PC on the camera speaker). This button will be
displayed only when "Audio output" or "Interactive" is
selected for "Audio mode" on the setup menu.
(☞ page 40)
The button blinks while the audio transmission is
being carried out.
When this button is clicked, the button will turn into
the button and audio from the PC will not be
heard.
Audio volume can be adjusted (Low/Middle/High) by
moving the volume cursor .
Notes:
• When a user is using the audio transmission func-
tion, the receiver button and the transmission button
will be inoperable for the other users.
• Possible duration of audio transmission is up to 5
minutes per transmission. When 5 minutes have
passed, the audio transmission function will be can-
celed and the audio reception function will automati-
cally be turned on. To turn the audio transmission
function on, click the transmission button again.
• When the camera is restarted, the adjusted volume
level (for both the audio transmission and reception)
will return to the level that had been set on the
[Audio] tab on the setup menu. (☞ page 40)
• Actual volume level will change in three steps even
though the volume cursor can be adjusted minutely.
@0 SD recording status indicator
The status of the SD recording can be checked with
this indicator.
When the SD recording starts, this indicator will light
red. When the SD recording stops, this indicator will
go off.
This indicator will be displayed only when "Manual"
is selected for "Save trigger" on the setup menu.
(☞ page 22)
@1 Main area (*2)
Images from the camera will be displayed in this
area.
The current time and date will be displayed at the
selected position in the time and date format set on
the setup menu. (☞ pages 19 and 20).
Click a desired point in the main area on the "Live"
page that is to be the center of the angle of view.
The camera moves to adjust the position in order to
set the clicked point as the center. Zoom can be
adjusted using the mouse wheel.
Note:
When an image is displayed at 22x, the clicked point
may not always be located at the center of the dis-
played image.
Important:
When the camera position is moved inadvertently
while the power of the camera is on, restart the cam-
era (restart) or refresh the camera position (position
refresh) on the [Initialization] tab of the
"Maintenance" page (☞ page 68).
*1 Only operable by users whose access level is "1.
Administrator"
*2 Only operable by users whose access level is "1.
Administrator" or "2. Camera control" when "ON" is
selected for "User authentication" (☞ page 54).
*3 Operable by users who belong to the access level
selected for "Authentication" on the [Audio] tab of the
"Camera setup" page (☞ page 40).
Refer to page 55 for further information about the
access level.
Note:
When operated by a lower access level user,
images displayed on the screen may be changed
temporarily. This does not affect operation of the
camera.