Filter
Top Products
10 C1572M (9/05)
Note the following:
•
To ensure uninterrupted operation, the 9760 system can be equipped with a backup CM9700-CC1 by means of a CM9760-HS hot switch.
For detailed information about the CM9760-HS, refer to the CM9760-HS Hot Switch Installation/Operation manual.
•
The CM9700-NW1, commonly referred to as the network interface unit (NIU), can be used to connect two or more CM9700-CC1 units to
create a networked system. Each CM9700-CC1 unit and attached devices comprise a node in the network. For detailed information about
the CM9700-NW1, refer to the System 9760 Networking Guide.
•
You can increase video output capacity of a single node from 128 to a maximum of 512 by using CM9760-MDA units. For detailed
information about the CM9760-MDA, refer to the CM9760-MDA Master Distribution Amplifier Installation/Operation manual.
MODELS
The following provides a list of models of 9760 system devices and compatible equipment.
CPU CONTROLLER AND COMPONENTS
CM9700-CC1 CPU controller. Operates on 120 VAC, 60 Hz or 230 VAC, 50 Hz.
CM9700-SER Serial communication (SERCOM) card (RS-422). Provides 8 SERCOM ports to interface peripheral equipment (4 cards
maximum per CM9700-CC1).
CM9700-SER-32 Port expansion unit. Provides 32 SERCOM ports. Includes interconnecting cables and adapters for DB9 and RJ-45
connectors. Data interface can be RS-232 or RS-422. Up to 3 units can be added to a CM9700-CC1. (Check with Pelco
Systems Applications Department before adding to an existing CM9700-CC1.)
MATRIX BAY AND COMPONENTS
CM9760-MXB Video matrix bay equipped with CM9760-MPS power supply. Operates on 120 VAC, 60 Hz.
CM9760-MXB-X Same as CM9760-MXB except operates on 230 VAC, 50 Hz.
CM9760-MXBL Video matrix bay for use with CM9760-DFL downframe looping cards. No power required.
CM9760-MPS Matrix bay power supply (spare). Operates on 120 VAC, 60 Hz.
CM9760-MPS-X Matrix bay power supply (spare). Operates on 230 VAC, 50 Hz.
CM9760-RPC Rear panel input card. Provides 16 BNC connectors to connect video inputs to matrix bay.
CM9760-RPL Double-wide rear panel card for single-bay looping. Reduces maximum number of inputs to 128.
CM9760-DFC Downframe rear panel card and cable assembly. Connects multiple matrix bays for expansion purposes.
CM9760-DFL Downframe rear panel card and cable assembly with BNC connectors for looping video.
CM9760-VCC Video input card capable of accepting up to 16 video inputs. Also requires a rear panel card (CM9760-DFC,
CM9760-DFL, or CM9760-RPC, or CM9760-RPL).
CM9760-RPM Rear panel output card. Provides 16 BNCs to connect video outputs to matrix bay. Also interfaces video output
signals from CM9760-VMC4, CM9760-VMC8, CM9760-VMC12, or CM9760-VMC16 video output card.
CM9760-VMC4 Video output card providing 4 video outputs. Requires CM9760-RPM.
CM9760-VMC8 Video output card providing 8 video outputs. Requires CM9760-RPM.
CM9760-VMC12 Video output card providing 12 video outputs. Requires CM9760-RPM.
CM9760-VMC16 Video output card providing 16 video outputs. Requires CM9760-RPM.
CM9760-VMM Video output module. Expands outputs of CM9760-VMC4, CM9760-VMC8, and CM9760-VMC12 video output cards.
KEYBOARDS
CM9760-KBD* Full-function desktop variable-speed keyboard. Operates on 120 VAC, 60 Hz.
CM9760-KBD-X* Same as CM9760-KBD except operates on 230 VAC, 50 Hz.
CM9760-KBR* Full-function 19-inch EIA rack mount keyboard. Operates on 120 VAC, 60 Hz.
CM9760-KBR-X* Same as CM9760-KBR except operates on 230 VAC, 50 Hz.
KBD300A Desktop keyboard with full switching capabilities plus joystick control of PTZ functions. Operates on 12 VAC or
±12 VDC. (Requires KBDKIT for power.)
KBD200A Desktop keyboard with full switching capabilities plus push-button control of PTZ functions. Operates on 12 VAC or
±12 VDC. (Requires KBDKIT for power.)
*Software version 8.03 or higher is required.