Filter
Top Products
30 C1572M (9/05)
VERIFYING SYSTEM OPERATION
After installation of the 9760 system is complete, verify system operation. To do so, perform the following from a CM9760-KBD:
1. Verify that the CM9760-KBD LCD displays the following:
SYSTEM 97XX
2. Enter the default operator password on the CM9760-KBD keypad: The default password for operator 1 is 0101; the default password for
operator 2 is 0202; the default password for operator 3 is 0303, and so on. The passwords are defined in the Operator PIN field in
CM9700-MGR.
The LCD displays the following:
ENTER MONITOR #
3. Enter the number of the monitor you are viewing—for example, 1—and then press the MON key.
4. Enter a camera number, and then press the CAM key.
5. Press the FWD key to advance through cameras and verify switching.
For detailed information about 9760 system operation using the CM9760-KBD, refer to the CM9760-KBD/KBR Keyboard Installation/Operation
manual.
NOTE: Depending on the version of the CM9760-KBD software, the LCD displays SYSTEM 9760 or SYSTEM 9700.