Filter
Top Products
C2910M-C (4/06) 41
Specifications
GENERAL
Imaging Device 1/3-inch SIMD
Dynamic Range 95 dB typical/120 dB maximum
Picture Elements Sensor resolution: 742 (H) x 552 (V)
Scanning System 525 (NTSC)/625 (PAL) lines, 2:1 interlace
Synchronization Internal/line lock/Pelco V-Sync
Horizontal Resolution More than 480 TV lines
Iris Control Automatic/manual
Electronic Shutter Range 1/15 to 1/3,500 second
Auto Iris Lens Type DC-drive
Minimum Illumination 0.8 lux, F1.2, 40 IRE, AGC on, 75% scene reflectance
Signal-to-Noise Ratio >50 dB
Vertical Phase Adjustable ±120°
Automatic Gain Control On-screen menu, adjustable to 21 dB
Backlight Compensation On-screen menu, four regions
Signal Processing SIMD digital signal processing (DSP)
Video Output 1.0 to 1.2 Vp-p, 75 ohms, adjustable
Auto White Balance Range 2,000° to 11,000°K
Gamma Correction 0.45 NTSC, 0.36 PAL, adjustable (0.25-1.00)
ELECTRICAL
Power Requirements 12-36 VDC ±10% or 24-28 VAC ±10%, 47-63 Hz; autosensing
Power Consumption 4.5 watts maximum
Power Connector 2-pin terminal block with screw lock
Video Connector BNC
Multifunction Connector 10-pin RJ45-10:
Analog composite video
Unshielded twisted pair (UTP) video
Power
Data I/O (Pelco P or Pelco D protocol)
Service Connector 3-conductor, 2.5 mm connector for optional CST150/CST100 camera setup tool
Auto Iris Connector 4-pin connector (miniature square)
MECHANICAL
Lens Mount C/CS mount
Camera Mount 1/4-inch UNC-20 screw, top or bottom of camera housing
ENVIRONMENTAL
Operating Temperature 14° to 122°F (-10° to 50°C)
Storage Temperature -40° to 140°F (-40° to 60°C)
Humidity 20% to 80%, noncondensing
PHYSICAL
Dimensions 3.60” D x 2.77” W x 2.40” H
(9.14 x 7.03 x 6.09 cm)
Weight (without lens) 0.40 lb (0.20 kg)
Shipping Weight 1 lb (0.45 kg)
(Design and product specifications subject to change without notice.)