Filter
Top Products
C3463M-B (2/11) 23
Dome Settings
*This setting applies to Pressurized Spectra IV dome systems only.
CAMERA
EXIT
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT
DOME SETTINGS
TYPE OF LIGHTING
PICTURE MODE
AUTO FOCUS
SURE FOCUS
PT FOCUS LOCK
ZOOM LIMIT
ZOOM SPEED
LOW LIGHT LIMIT
IR CUT FILTER
AUTO IR LEVEL
LOW LIGHT FOCUS
<ADVANCED SETTINGS>
BACK
EXIT
CAMERA
TYPE OF LIGHTING
Pelco has calibrated settings that optimize the white balance and the picture for several lighting conditions. There are two settings:
T1 (default): For use in outdoor applications.
T2:
For use in indoor applications.
Picture Mode
(Applies to 27X and 35X models only.)
Picture mode offers enhanced color and brightness depending on the scene.
Available settings are NORMAL (default) and ENHANCED. When picture mode is set to ENHANCED, the camera enhances colors and the overall
picture.
NOTES:
• The scene on your
monitor will darken temporarily when you change the picture mode setting.
• When Type Of Lighting is set to T1 and Picture Mode is set to Enhanced, and you change the setting for Type Of Lighting to T2, Picture Mode
is no longer visible in the menu. When Type Of Lighting is returned to the T1 setting, Picture Mode becomes visible and is automatically
reset to Normal.
AUTO FOCUS
Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.
There are two auto focus settings:
ON (default): If auto focus mode is set to ON, the camera will focus automatic
ally when using pan, tilt, and zoom (PTZ) functions.
OFF: Focus is operated manually. To focus, press the Foc
us Far or Focus Near button on the controller.
Sure Focus
(Applies to 27X and 35X models only.)
When sure focus is enabled and all PTZ motions are stopped, the camera will attempt to find a fixed focus position and lock to an object in the
sce
ne. If a focus lock is acquired or a specific amount of time has expired with no focus lock, the focus position remains fixed until PTZ is
resumed.
NOTE: If au
to focus is OFF, sure focus is disabled and hidden from the menu.