Filter
Top Products
C3463M-B (2/11) 35
The Spectra IV SL dome system, which includes 23X models, has 64 preset positions. The presets that can be configured are numbered 1 to 32
and 35 to 64.
The Spectra IV SE dome system, which includes 27X and 35X models, has 256 preset positions. The presets that can be configured are numbered
1 to 32, 35 to 82, and 100 to 256.
NOTE: The number of available presets may be limited by the head-ins, controllers, and DVRs that are connected to your dome system.
Each of the user-definable presets can be configured to use pan, tilt, camera settings, and motion detection.
The following presets are predefined for specific functions:
Preset 33: Flip command; pans the dome drive 180 degrees
Preset 34: Pan zero command; directs the dome drive to the factory-determined zero reference point
Preset 83 to 87: Reserved
Preset 88: IR filter IN (color)
Preset 89: IR filter OUT (black-white)
Preset 90 to 91: Manual limit stops
Preset 92 to 93: Scan limit stops
Preset 94: Reserved
Preset 95: Select main configuration menu
Preset 96: Stop a scan
Preset 97: Random scanning
Preset 98: Frame scanning
Preset 99: Start auto scanning
NOTE: For American Dynamics
™
controllers with only 32 presets, switch SW2-1 on the dome drive to the ON position. When SW2-1 is ON,
several presets change (refer to Table D).
If the limit stops are turned off, presets 23 to 26 can be used as regular presets.
Table D. Presets for American Dynamics Controllers
Spectra IV Presets
American Dynamics
Controller Presets
88 21
89 22
90 23
91 24
92 25
93 26
95 28
96 29
97 30
98 31
99 32