Filter
Top Products
Figure 4. Motion Detection Areas
38 C3463M-B (2/11)
2. Set the sensitivity of the motion detection area:
a. Position the cursor next to SENSITIVITY for DETECTION AREA 1, 2, 3, or 4.
b. Press Iris Open, the cursor moves to the right.
c. Use the joystick to select one of the
following sensitivity levels:
HIGH: The sensitivity level is
high.
MEDIUM (default): Average sensitivity.
LOW: The sensitivity level is low.
d. Press Iris Open to make selection.
NOTE: Motion detection is not guaranteed to catch 100 percent of activity.
Activate Aux Command
Motion detection can be configured to trigger an auxiliary command when motion is detected. The following are the settings for ACTIVATE AUX:
OFF (default): Motion detection will not trigger an AUX command.
1: Triggers a command to AUX 1.
2: Triggers a command to AUX 2.
Aux Time
Aux time is the length of time the auxiliary will remain on after motion is detected. Available settings for AUX TIME are 1 to 60 seconds.
EDIT SCHEDULE
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 53) with the following exceptions. In the Edit Schedule
menu, the event type cannot be changed. Also, the Holiday feature cannot be accessed from the Edit Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit Event o
n page 54.
MOTION DETECTION AREAS