Filter
Top Products
32 C3463M-B (2/11)
DISPLAY SETUP
When display setup is enabled, you are notified that the camera detects motion in a scene. There are two settings:
ON (default): Display setup is enabled and a transparent blue rectangle appears in the area of the scene where motion has been detected.
OFF: Display setup is disabled.
SENSITIVITY
Sensitivity adjusts the camera’s sensitivity to motion, thereby adjusting the number of moving objects that will be tracked automatically. There
are two settings:
HIGH (default): Sensitivity is increased and most moving objects, regardless of size, will be detected and tracked.
LOW: Sensitivity is decreased and smaller movements that may not be as significant will not be tracked.
START TIME
Start time is the amount of time between the execution of a user command and the start of auto tracking. The start time can be set between
1 and 10 minutes. The default setting is 1 minute.
ZOOM
When zoom is enabled, the camera automatically zooms in or out to keep the object of interest in the main field of view. There are two settings:
ON (default): Automatic zoom is enabled.
OFF: Automatic zoom is disabled.
LOST ACTION
If the object of interest is lost from the field of view and there is no other moving object to track, the camera will either stop automatic PTZ or will
zoom out to attempt to relocate a moving object. There are two settings:
STOP (default): Automatic PTZ stops if the object of interest is lost from the field of view.
ZOOM OUT: The camera zooms out to attempt to relocate the object of interest or to locate a new moving object to auto track.
RETURN
Return is the amount of time after the last motion has been detected and the time at which the camera returns to the location where auto
tracking began. Return can be set between 10 and 60 seconds or it can be turned off. The default setting is OFF.