Filter
Top Products
14 Pelco Manual C540M (6/98)
3.2.9 User Definable Control Keys
The
user definable control keys
can be assigned various functions such as the
enter
function. While in
setup
mode, functions can be assigned to the
user defin-
able control keys
as follows:
1. With the keyboard in
setup
mode, select to switch to
keyboard define
mode. Select once again to define individual keys.
2. Press the
user definable control key
to which a function is to be assigned. If
the pressed key is already defined, its assigned function will be shown.
3. Using and/or , scroll the list of available functions. Align the de-
sired function with the arrow.
4. Select function by choosing .
5. To save
user definable control key
settings, select .
6. Having defined and saved the desired keys, select .
7. Select .
3.2.10 Setting Up a Receiver/Driver
1. In
setup
mode, select from the
setup mode
menu.
2. Select COM 1 using and/or .
3. Select the correct receiver/driver type using
and/or .
4. If necessary, repeat steps 2-3 to select the receiver/driver connected to COM 2.
5. Select
.
6. Select .
3.2.11 Downloading Keyboard Setups
(See Appendix D for Keyboard Hook-up Details)
The CM9760-KBD keyboard setup can be downloaded and uploaded between key-
boards. A keyboard setup can be uploaded to many other keyboards, avoiding the
need to configure each keyboard individually using
setup
mode. Keyboard setup
information can be downloaded/uploaded using one of two configurations:
1. Keyboard to keyboard.
2. Through the CM9760 system.
Setup information that can be downloaded/uploaded includes:
1.
User definable control keys.
2. Relay configurations.
3. Direct camera control parameters.
NOTE:
Many of the functions require
an additional attribute in the form of a
number, for which you will be prompted.
To enter such as a number: select
; type the number; then, select
once again.
NOTE:
Section 3.2.11 shows how
to download and upload definitions of
the user definable control keys be-
tween keyboards.
NOTE:
Several keys may be defined
prior to saving.
KEYBOARD DEFINE MODE
> NOT DEFINED
NUM 0 KEY DEFINE
NUM 1 PLEASE ENTER A KEY
NUM 3
NUM 4
NOTE:
Do not intermix receiver/
drivers using a single port; usable
receiver/drivers comprise those us-
ing RS422 Pelco P-type protocol.
This would include most Legacy
®
,
Intercept
®
and System 9750/9760
ERD receiver/drivers.