Filter
Top Products
Pelco Manual C540M (6/98) 19
4.4 LOGGING OFF
To log off, select from the
default
menu, which can be reached by pressing
. This will result in the prompt
Are you sure you want to log off?
Select
to log off, or select to remain logged on.
Alternatively, select monitor 0 to log OFF from any menu level without the
log-off
prompt.
4.5 SELECTING MONITORS
1. Using the keypad, enter a monitor number, and then press
or,
select from the
default
menu.
2. Cycle through the available monitor sequence using
and .
If a
user definable control key
has been assigned the
enter
function, monitors
can be selected as follows:
1. Press .
2. Enter a monitor number.
3. Press the
user definable control key
that has been assigned the
enter
func-
tion -
this can be located by referring to the decal
.
4.6 SELECTING CAMERAS
1. If necessary, select from the
default
menu, to reach the
camera
sub-
menu.
2. Cycle through available cameras using and
or,
using the numeric keypad, enter a camera number and press .
If a
user definable control key
has been assigned the
enter
function, cameras
can be selected as follows:
1. Press
.
2. Enter a camera number.
3. Press the
user definable control key
that has been assigned the
enter
func-
tion -
this can be located by referring to the decal.
and can also be used to cycle through cameras.