Filter
Top Products
28 Pelco Manual C540M (6/98)
5.6 SETTING THE TIME AND DATE
The time and date can be changed from the 9760 keyboard. Time and date infor-
mation is stored in the CM9760 system. To change the time and date:
1. Select from the
default
menu, in order to call up the
program
sub-
menu.
2. If necessary, enter your
define
PIN.
3. Select
.
4. Enter the day, month and year. For example, to enter the fifth of January 1997,
type 05 01 97.
5. Once again, select
.
6. Enter the hour, minute and second in the 24-hour format. For example, if it is
8.00 pm, then enter 20 00 00.
7. Select
.
8. Select
.
The new date and time information will be updated on all equipment in the system.
It may take up to one minute for these changes to be updated on monitors.
5.7 CAMERA SEQUENCES
Camera sequences are comparable with macros. They may include footage of a
fixed duration from a sequence of cameras. For example, the car park might be
monitored for five seconds, the lobby for ten seconds, and so on.
Using
on the
define
menu, it is possible to create a camera sequence by
the same techniques employed to program macros (see Section 5.4).
Camera sequences are assigned to monitors. They are invoked when the assigned
monitor is selected. Resultant camera sequences are paused and resumed using
.
NOTE:
Care should be taken when
the system is networked, because
changing the time/date on any
CM9760-KBD keyboard will alter the
time for the entire system. Approval
should be sought from the appropri-
ate authority before making such
changes.