Filter
Top Products
Pelco Manual C540M (6/98) 27
Using macros, camera sequences can be programmed directly from the
CM9760 keyboard. To program a macro:
1. Select from the
default
menu.
2. If necessary, enter your
define
PIN.
3. Select
to display the
macro program
sub-menu
4. Enter a macro number.
5. Press .
6. If necessary, enter a monitor number using the keypad.
7. If necessary, enter a camera number using the keypad.
8. Enter a
dwell
period using the keypad, and then select .
9. To enter another step, select or press , and repeat steps 6 to 8.
10. Select to store and execute the macro.
11. Select to revert to the
default
menu.
5.5 VIDEO LOSS
A camera malfunction which causes the loss of a video signal may alert the opera-
tor, or trigger an alarm. Using the
video loss
function, such a faulty camera can be
disabled if required. To disable or enable a camera:
1. Select from the
default
menu.
2. If necessary, enter your
define
PIN.
3. Select .
4. From the
video loss
sub-menu, enter the camera number and select
once again.
5. Enable or disable the camera by selecting
.
An alternative method of disabling a camera is:
1. Enter the camera number.
2. Select
from the
default
menu.
3. If necessary, enter your
define
PIN.
4. Select .
5. Enable or disable the camera by selecting
.
NOTE:
indicates that the
camera is disabled.
NOTE:
If the entered macro num-
ber has been allocated, the Macro
Defined prompt will be displayed.