Filter
Top Products
107
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONS
OTHERS
In rare cases, the camera may not operate correctly due to
statistic electricity. This can be remedied by taking the batteries
out and putting them back in again.
Symptoms Causes Remedies
Reference
The subject is too close or
difficult to autofocus.
Low battery warning on
the LCD panel blinking.
The exposure mode is being
set to .
The mode dial is set to
other than the Picture Mode.
Flash mode is not set to
Auto pop up mode( ).
When the appears on
the LCD panel, the built-in
flash does not discharge in
bright lighting conditions.
The camera does not have
the power zoom function.
Focus manually by using the
matte field.
Replace the batteries.
Set the mode dial other
than .
Set the exposure mode dial
to the Picture Mode.
Set the flash mode dial to (
) or ( ).
P.60
P.12
P.26
Focus indicator in
the viewfinder blinks.
The built-in flash
does not charge.
The built-in flash does
not activate when the
flash-pop up button is
depressed.
The built-in flash
does not pop up
automatically.
The built-in flash
does not discharge
even if the flash is in
t
he popped-up position.
The power zoom
system does not
function.
The Metered Manual Mode
or Bulb Exposure Mode is
being used.
Set the exposure mode dial
to the other position.
P.57
AE lock function do
not operate.