Filter
Top Products
25
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONS
OTHERS
5 After the data has been changed, depress the
[DATE] button each time until blinking stops.
6 Depress the [DATE] button to select your date
mode that you wish to imprint on your pictures.
✍
MEMO
Depress the [DATE] button in synchronize with a time signal to set the second to
zero while ( : ) is blinking.
Operational precautions
• The working temperature for data printing is 0°C – 50°C (32F – 122F).
• Use DX-coded films with ISO rating from 25 – 5000.
• If high-speed film with an ISO rating of1000 or faster is used, the imprinted
characters may blur.
• If film with ISO rating of 50 or slower is used, the printed characters may be dark
or dim.
• If you release the shutter while the blinking data is being corrected, the data
cannot be imprinted.
4 Move the Select dial to right or
left to change the digits that
you wish to change the blinking
digits.
The digits increase by one each
time the select dial is moved to
right and the digits decreased
by it’s moved to left.
Holding the select dial for about
one second will change the
digits rapidly.