Filter
Top Products
31
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONS
OTHERS
4 Align the film leader with
film leader end mark 1 as
shown as illustrated.
• If you pulled out too much film,
push it back into the cartridge to
reduce the slack.
• Make sure that the film leader is
positioned under the film retainer
and the film perforations properly
engaged on the sprocket tooth.
1
2
Note
• The DX information pins in the film chamber are used to read film speed. Keep
them clean and free from scratches.To remove smudges, wipe them gently with a
soft, dry cloth.
✰
Important
The shutter curtains are made from fine precision material. Do not touch them with
your fingers or any other object while loading the film.
5 Close the back cover and
turn the main switch ON.
The film will be advanced to first
frame automatically and the
exposure counter 1 and film
status information appear on the
LCD panel when film is loaded
properly.