Filter
Top Products
82
✍
MEMO
• The built-in flash does not pop up even if the flash pop-up button is depressed
with the flash mode is set to .
• This mode can be used with the red-eye reduction together.
• When the flash pop up button is depressed, is disappeared from the LCD
pane if auto flash mode was set, and the flash is always discharged even if the
subject is not required flash light.
• The shutter cannot be released until the flash is fully charged.
1 Push the flash pop-up
button to activate the flash.
will disappear on the LCD
panel.
2 appears in the
viewfinder and on the
LCD panel when the
flash is fully charged.
3 Depress the shutter release
button fully, and the flash
unit discharges.
4 After using the Built –in
flash, push down the flash
head to lock it in the closed
position.
MANUAL POP UP THE BUILT-IN FLASH