Filter
Top Products
44
UNLODING A FILM
1 The film automatically
rewinds at the end of the
roll.
During rewinding, blinks
on the LCD panel, indicating that
the film is being rewound, the
exposure counter counts frame
numbers in reverse.
2 When the film is fully
rewound, only blinks on
the LCD panel.
3 Open the back cover and
remove the film.
✍
MEMO
• When removing the film from the camera, avoid direct sun light.
• A roll of 24-exposure film takes about 20 seconds to rewind.
• Before opening the back cover, check that [ ] is blinking.
• The shutter may be released a frame or more after the specified number of
frames have been used as indicated on the film cartridge. However, those extra
frames may be lost in processing. When you take important pictures, rewind the
film when the film reaches the number of frames indicated on the film cartridge.
Step 8