Pentax MZ-60 Digital Camera User Manual


 
3
Other precautions
The temperature range at which this camera functions properly is 50°C to -10°C
(122F˚ to 14F˚).
A camera which has been submerged in water usually cannot be repaired. If
such an accident should occur, it is advisable to contact a Pentax Service Center
immediately.
To maintain optimum performance, it is recommended that the camera be
inspected every one or two years. If the camera has not been used for an
extended period, or is being prepared for an important photographic session, it is
recommended that you have the camera inspected or test shoot with it.
Repairs deemed necessary due to usage of this product in an industrial or
commercial application may not be covered under the terms of the Pentax
warranty.
The PENTAX warranty provides only for the repair of defects in materials or
workmanship. Damage of any kind cannot be repaired at any charge under the
terms of the warranty. If the difficulty is caused as a direct result of the product
being used in conditions as outlined in the "Precautions for Your Camera" section
or any other operation contrary to the instructions outlined in this manual,
charges will be assessed and a repair quotation will be provided.
PRECAUTIONS FOR BATTERY USAGE
Use two 3V lithium batteries (CR2 type).
Misuse of the battery can cause hazards such as leakage, overheating,
explosion, etc.The battery should be inserted correctly with regard to polarity (+
and -) marked on the battery and the camera.
Battery performance may be temporarily hindered in low temperatures, but will
recover in normal temperatures.
Keep a spare battery on hand for replacement convenience when shooting
outdoors or while traveling.
If the built-in flash is used continuously, the battery may become warm, but it
does not mean that the battery is faulty; it is one of the battery's characteristics.
Replace the batteries at the same time. Do not mix battery brands, type or an old
battery with a new one. It may cause explosion or overheating.