Filter
Top Products
43
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONS
OTHERS
✍
MEMO
• The shutter cannot be released if the subject is out of focus.
• Depress the shutter release button halfway down. While s on, the camera-to-
subject distance is fixed (Focus lock). To refocus on another subject, lift your
finger off the shutter release button.
• The focus indicator blinks when the camera is not able
to obtain proper focus for one of the following reasons.
1. The subject is too close. Adjust the camera-to-subject distance.
2.The subject is difficult to autofocus. See "HARD-TO-
AUTOFOCUS" subject on page xx.
4 When the subject is in
focus, the focus indicator in
the viewfinder lights up.
5 Take a picture.
Gently depress the shutter
release button completely.
The built-in flash pops up
automatically when the subject is
not lighted adequately.