Pentax MZ-60 Digital Camera User Manual


 
79
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONS
OTHERS
SELECTING THE VARIOUS BUILT-IN FLASH MODES
MEMO
The auto-popup flash mode can only be set when one of 6 picture modes is
selected.
The built-in flash pops up automatically when is displayed on the LCD
panel. But it discharges only when required. (Automatic flash function)
or can only be set when one of 6 picture modes is selected.
The auto-popup function of the built-in flash does not work when the AE lock
function is in use.
The automatic flash function can also be used with the external flash.
Even if is displayed on the LCD panel, the built-in flash does not pop up
automatically when the external flash has been mounted either with the power off
or the external flash is not yet fully charged.
If the red-eye reduction is used while the AF360 FGZ, etc. is set as a slave unit,
the pre-flash will trigger the slave unit to discharge. Do not use red-eye reduction
with slave unit.
Auto-popup Auto-popup
+
Red-eye reduction
Manual-popup
+
Red eye reduction
(See page xx)
Manual-popup
(See page xx)
Flash off
(See page xx)
At each depress of the flash
mode button, the flash mode
on the LCD panel changes as
shown in the chart