Filter
Top Products
12
1
Getting Started
Powering the Camera
Install batteries in the camera. Use one CR-V3, or use two AA lithium
batteries, AA Ni-MH batteries, or AA alkaline batteries.
1 Slide the battery cover in the direction indicated, and
flip open.
2 Insert the batteries according to the +/- indicator in the
battery chamber.
3 Close the battery cover and push horizontally to lock.
Installing the Batteries
When using for a prolonged period, please use the AC adapter kit
D-AC5. (
1p.14).
• CR-V3 (battery included), AA lithium batteries, and AA alkaline
batteries are not rechargeable.
• Do not open the battery cover or remove the batteries when the
power switch is on.
• When you will not use the camera for a long while, remove the
batteries. Otherwise, the battery may leak.
• If the date and time settings have been reset when you insert new
batteries after a long while, follow the procedure for “Setting the Date
and Time” (p.20).
• Insert batteries correctly. Batteries inserted backwards can cause a
camera breakdown.
(Using CR-V3) (Using AA batteries)